Showing posts with label video. Show all posts
Showing posts with label video. Show all posts

Friday, July 18, 2014

Video: DIY Chicken Coop for Under ten bucks (No Music)

DIY Chicken Coop
 (No Music)



Thank you for the responses on my latest video of building your own chicken coop out of recycled materials. Some of you have expressed in certain countries that the video isn't available because of copyright pertaining to the video. So I have made one that is exactly the same as the original however, it doesn't contain any music. This should solve the problem. Thank you for the feedback and happy watching :) Just follow the link below. 



Sara Ayres

Video: DIY Chicken Coop for under 10 bucks

DIY Chicken Coop
Cost: 10 Bucks
Time: 3 Hours

Today with the help of family members and a friend we were able to build this chicken coop in roughly three hours and around ten bucks. Most materials were either given to me or left over from previous projects. The money invested was to build the feeder and the latch for the gate which was around five bucks. This simple do it yourself chicken coop with proper ventilation, will provide a nice nesting place all year round, and food for the table. Thus, cutting my family's food bill. Below is a materials list and a link to the video to see how it's done on YouTube. If you like what you see don't forget to follow me on my blog and to subscribe to my channel on YouTube. All this is possible because of all of you. So thank you for your continuous support and I look forward to all your comments and questions either through blogging, YouTube or my email. 

Direct YouTube Link: http://youtu.be/X2eKY1rsb1I

Materials:

An existing shed
26' fencing
3- 10' wooden posts
2- Fence posts
3- Pallets (1 is for the gate)
Heavy duty wire
2- Floor vents (ventilation)
Handful of nails or screws
1- Gate latch
1- Bale of straw

Then of course your chickens, roost, nests, water, and feeder.

Extras but not necessary:

*I used 2- 2x4's screwed to the shed floor for extra stability of the fence but it wasn't necessarily needed. I also added 2 old wire sides of cages to the pallets on the end just to make sure the chickens couldn't get out but probably wasn't needed either. 

*Use materials you have on hand or barter with a neighbor, family member or friend. You can look on craigslist under the "free" sections too. You'd be amazed at what you'll find.

Tools:

Hammer or drill (depending on if you're using nails or screws)
Sawzall
Wire cutters
Tape Measure



Tuesday, July 15, 2014

Video: Chicken Feeder for Medium to Full Size Chickens

 Chicken Feeder
for 
Medium to Full Size Chickens


Today I created a video on how to make a chicken feeder for medium to full size chickens. The link is just before the step by step instructions. It is a simple project and will save you money. All it takes is your time (which took me roughly 20 minutes), and if you have the materials on hand (from previous projects or scouting), use those or you can purchase the items at any hardware store such as Menards, Lowe's, etc. I ended up purchasing the boards from Menards because I had already used what I had for something else. I walked out of Menards spending under 5 bucks and that included my water I bought :)

Materials:

1- 1x6 Base
1- 1x4 Sides
1- 1x1 1/2 spinning top
A hand full of nails (I used trim nails)


Tools:

Handsaw
Hammer
square
carpenters pencil

http://youtu.be/tbSN-5Z029k

Directions:

1. Cut the 1x6 in half so you have two 3 foot pieces and set one piece aside for later use.
2. Cut the 1x4 in half so you have two 3 foot pieces.
3. Nail both 1x4 pieces to each side of the 1x6 making sure it's flush on both ends.
4. Now take the 1x6 that you set aside and cut two pieces 8" long. These will be your side pieces.
5. Cut a notch in the ends of both 8" piece so a nail can freely spin inside it
6. Tap each 8" piece into the ends of the feeder and nail those on firmly.
7. Cut the 1x1 1/2 piece into 33 3/4" long and tap in a nail into both ends. Tap it in there firmly but not all the way.
8. Put the 1x1 1/2 piece with the nails in both ends into the notch that you cut in the 8" sides.

WOE LA you have your chicken feeder for medium to full sized chickens made. Congratulations!!!


Monday, July 14, 2014

Introductory Video Part 2

Part 2 has finally uploaded. It's direct link is:

http://youtu.be/e9sW2xDdYm0

or you can find me directly through YouTube....Ayres Acre Advice


Introductory Video Part 1

Introductory Video
Part 1


Today I have done my introductory video. Basically I am showing you around the homestead, showing you what I have done, future plans and some of the materials that I have picked up for free. First project that I will be videoing is the making of a chicken feeder and nests. Followed by many other projects for the homesteader including canning, pressure canning, building projects, and out scouting the neighborhood for resources that are free or little cost. You will be surprised at what people are willing to give away, if you're willing to haul it. With the nice weather that we have outside today I'm going to get my lawn done and get right to making the feeder and nests because come next week, those items will be put to good use once the shed is turned into a chicken coop for six laying hens. Thank you for following me on this journey. All videos will be uncut and unedited and completely in the raw. However, the only cutting that will be done is putting them in part 1 and part 2, for uploading. A long video would take too long to upload and who has time for that when there is so many other things that can be done. In other words, it would be like standing there watching your laundry in the washer when you could be playing a game with your child or doing research on homesteading. You get my drift. lol You can watch through the YouTube link and if you want, you can subscribe so you don't miss a video and a chance to learn something new. I encourage comments, tips, trick, ideas that you have learned along the way because I am always up for finding new ideas and new ways of doing things. And if anyone can give me any tips on uploading video to YouTube that would be great. I would like to welcome you again to Ayres Acre Advice....Little Land, Landing Big...or more importantly...Welcome to my home.

YouTube: Ayres Acre Advice

Introductory Video Part 1 http://youtu.be/hNK3QwFL2aY

Saturday, July 12, 2014

Today it has been sprinkling on and off and making it hard for me to get out there and make the chicken feeder like I need to get done. I am excited to get the video rolling. And with the rain, can't mow my lawn either. So to take advantage of the day, I went and did some grocery shopping and took the scenic route home. On days like this, I take advantage of getting those "other" things done that are good rainy day things. I am also doing some research on some new places that might hold some available resources. I am always looking for new ways to save money, and perhaps, time. One place I like to look is on craigslist. There is a "free" section and today, I have found several nice items, including a free house!!! Just have to move it. However, I won't be doing that, but it just goes to show that there ARE free things out there, you just need to know where to look. One thing to always remember, if you do buy something from someone whom you don't know, never go alone when you go to conduct your business. With that said, I have found some free lumber, just need to go pick up. :) Even if you find something that you don't need right now, go pick it up anyway, because I'll show you how things that I've picked up a year ago, are being put to good use this summer. And, if it's a great item, and you know you won't ever use it, such as say a free couch or what have you, if you have the room, go pick it up, and then you can use that to sell for money, or barter with and get something that you  need. I have bartered to get things that I've needed. It's just another great useful way to be self reliant! And that's always a plus!!! Happy hunting and pray for sunshine tomorrow so I can get out the power tools and get started on making videos.